The chemical pump is a single-stage, radially split, cantilever mixed-flow pump. It adopts horizontal foot installation and is suitable for conveying large flow, low head, clean or polluted media, and has the characteristics of high efficiency and low energy consumption. It is suitable for various acids, alkalis, salts and corrosive liquids at medium and low temperatures, and can also be used for media containing solid particles.

The pump body is supported by feet and adopts a “front pull-out” structural design. When inspecting and disassembling the impeller and shaft seal, there is no need to disassemble the pipeline connected to the pump body, making maintenance easy.
The legs of the pump body can withstand any load from the pipeline and transmit it directly to the foundation. In this way, the rotor will not bend due to the load on the pump, thereby ensuring the service life of the shaft seal and bearings.
The pump device can be equipped with a complete exhaust device to facilitate the exhaust of the suction pipeline.
The shaft seal can use double-end mechanical seals and external cooling and flushing water to improve the working conditions of the shaft seal and extend the service life of the mechanical seal.

Scope of application:
It can be used in forced circulation of evaporators, mariculture, gas engineering, water conservancy irrigation and water treatment systems, industrial processes, seawater salt production, etc.
Performance parameters:
Flow rate: ~5000m³/h
Lift: ~30m
Speed: 485~1450r/min
Design pressure: ~0.6MPa
Operating temperature: -40℃~150℃